Python 90° Hygrometer Holder

by speckhobbies_com · 3D Printer Accessories

14 Downloads

6 Likes

7 Makes

A Hygrometer mount so you can see it in your Python AMS enclosure while standing up. I made my first one using Bambu's orange ABS-GF with a .6 Hotend nozzle.Using a .4 makes for a better print. You'll need to replace that front center enclosure screw with a longer one.I used an M3 x 20mm but you could use a 25mm or maybe even a 30mm if that's what you have.It's a simple quick print of about 26 minutes.You could use PLA, PETG, ASA or whatever you have.The screw hole is threaded so it shouldn't crack or split with a M3 bolt.