Thingiverse
Quad Lightbars
by AtilY
33
Downloads
28
Likes
0
Makes
atv lightbars, print it with brims and supports,8 mm shell thickness 10% infill after first 3-5 mm so it will hold the screws solid as possible in %100 filled body.Cob daytime 17cm leds fixed with double sided tape and 2 pieces fixed together with m3 bolts and screws, mirror the file for the upper piece on the other side as you g coding it.Under part don't need any flip op. so it will fit on both sides.The Pipe diameter is 25mm
link of leds: https://de.aliexpress.com/item/32968865074.html?spm=a2g0o.productlist.0.0.62173636KXeCx7&algo_pvid=a452afb4-59a1-4e2e-af26-59219bdebca5&algo_expid=a452afb4-59a1-4e2e-af26-59219bdebca5-8&btsid=c8d9892a-5485-4b30-b7a4-2c4517f37b9e&ws_ab_test=searchweb0_0,searchweb201602_8,searchweb201603_53
Orange ones:
https://de.aliexpress.com/item/32699366086.html?spm=a2g0o.productlist.0.0.328663b5bnLXTp&algo_pvid=8e202f3f-3d0d-437d-917f-85c80e91c3dc&algo_expid=8e202f3f-3d0d-437d-917f-85c80e91c3dc-31&btsid=0b8a7d7e-6b12-48e8-a857-71ae99e2b0a3&ws_ab_test=sea
link of leds: https://de.aliexpress.com/item/32968865074.html?spm=a2g0o.productlist.0.0.62173636KXeCx7&algo_pvid=a452afb4-59a1-4e2e-af26-59219bdebca5&algo_expid=a452afb4-59a1-4e2e-af26-59219bdebca5-8&btsid=c8d9892a-5485-4b30-b7a4-2c4517f37b9e&ws_ab_test=searchweb0_0,searchweb201602_8,searchweb201603_53
Orange ones:
https://de.aliexpress.com/item/32699366086.html?spm=a2g0o.productlist.0.0.328663b5bnLXTp&algo_pvid=8e202f3f-3d0d-437d-917f-85c80e91c3dc&algo_expid=8e202f3f-3d0d-437d-917f-85c80e91c3dc-31&btsid=0b8a7d7e-6b12-48e8-a857-71ae99e2b0a3&ws_ab_test=sea
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
