quadruped

This is my design for a quadruped. Most 3 Degrees of Freedom (DoF) legs also have 3 parts to the legs. I wanted to see if it was possible to get 2 DoF from one joint.

**Design Decisions:**
1. I then decided to go with a cable drive and keep the servo's inside the body, rather than make them part of the leg as most others have.
2. Make it modular so that you can attach what ever size servo's you want, to it. I have not included the central square into the downloadable files as this would depend on the size of servos you choose to use as well as what and where you would like to mount any electronics and/or sensors or cameras you want to include.
3. The two part leg should print pre-assembled. There is 0.2mm gap so even a normal self build 3D printer should be able to print this. I sliced this with KISSlicer64 but be sure to enable "Avoid Crossing Perimeters" in your slicing program. I found that Slic3r does not slice this thing right and screws up the design. Let me know if you