queen

Project: queen.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 83.33x125mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.4mm and the Actual Depth is 1.4mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 2 unique filamentsSwap Instructions: Start with Charcoal At layer #9 (0.8mm) swap to Ivory White for the rest.