Quick Release G29

This is a quick release mod for the g29 from Logitech.

To build the mod, you will need this extras things:

4 - M3 x 20mm screws
4 - M3 nuts
2 - M3 washers

3 - M4 x 45mm screws
3 - M4 nuts
3 - M4 wahers

2 - Db9 connector (male, female)

2 - jst 2.0mm ph 7-pin (male, female)

Wires to joint the db9 and jst connectors throug solding, and shrink tube.

You will use the jst female connector in the base, and the male in the wheel.

And you will need to cut de 4 corners of the db9 connector, because of the hexagon walls.

The 3 M4 screws, whases and nuts, and 2 M3 screws and nuts, you will use in the whell.

The 2 M3 screws, whasers and nuts you will use in the base.

In the wheel, the M3 nuts will be inserted in the iner wall throug some slots in both sides.

To mount the quick release, you need to put the quick release nut first in the base, and after that you can screwet the base part.