Quokka Hueforge

Project: quokka.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 168.05x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2mm Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Grey At layer #17 (1.44mm) swap to White At layer #21 (1.76mm) swap to Black for the rest. Boost Me