Thug Quokka

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 113.33x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.8mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Overture Matte brown Transmission Distance: 5 PLA Overture Matte Light Brown Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to brown At layer #15 (1.28mm) swap to Light Brown At layer #18 (1.52mm) swap to Jade White for the rest.