Rain

Project: faccia bagnata.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.2mm and the Actual Depth is 1.3mmFilaments Used: PLA Sunlu Meta Black Transmission Distance: 1 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA Overture White Transmission Distance: 4.4This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Light Gray At layer #8 (0.72mm) swap to White for the rest.