Raspberry Pi 3B Project Casing

Simple box casing that can be closed up for IoT projects. Wide enough to support USB on both sides within the enclosure. Uses 3M screws to close the lid, holes for mounting the Pi are 3M, though you'll need slightly smaller to fit inside of the Pi. Use a set bit to add the ridges for the bolts to stay in the holes, and nuts with the bolts used to mount the Pi.

Lid is 3mm tall. Box is 145mm long by 110mm wide and 30mm tall.

Hole in the box is big enough to fit USB cords through easily.

I printed with 4mm high layers, 2mm for the first layer. Doesn't need to be too detailed.