Raspberry Pi 4 Case - Modified

I really like eabani's original case, but I wanted to make a few mods, for my own hardware, and to change the mounts a bit. I redrew the original design in Fusion 360, and added room for a 4-port USB3 hub, and a panel-mount ethernet extender.

All the listed part numbers are from McMaster-Carr. You should be able to get equivalents from your local hardware store.

**Hardware used:**
- 8x 94180A333 - Tapered Heat-Set Inserts for Plastic - Brass, M3 x 0.50 mm Thread Size, 6.400 mm Installed Length
- 8x 91290A120 - Black-Oxide Alloy Steel Socket Head Screw - M3 x 0.5 mm Thread, 16 mm Long
- 2x 91294A125 - Black-Oxide Alloy Steel Hex Drive Flat Head Screw - M3 x 0.5 mm Thread, 5 mm Long
- 2x 91290A109 - Black-Oxide Alloy Steel Socket Head Screw - M3 x 0.5 mm Thread, 4 mm Long
- 2x 91294A012 - Black-Oxide Alloy Steel Hex Drive Flat Head Screw - M2.5 x 0.45 mm Thread, 5 mm Long
- 4x 94180A321 - Tapered Heat-Set Inserts for Plastic - Brass, M2.5 x 0.45 mm Thread Size, 3.4 mm Install