Raspberry PI 5 case

Raspberry PI 5 caseOverall dimensions 205 x 94mm.Box for raspberry PI 5 with USB 3.0 SSD 2.5&#34; hard drive. An ideal solution as a low power NAS or Home Assistant, etc. In the front part of the cover there is a vent for a fan with dimensions of 80 x 80 mmThe box consists of three parts that are either screwed or glued.Fan coverVentilator cover for 80 x 80 mm fan. The fan cover can be glued in place. If the fan is to be replaced later, it can be removed and removed from the back without damage. A tolerance of 0 was used when designing the cover. Ideally, the print should hold without the use of glue.The photo shows the logo of my home automation project. This logo is not in the STL files. CaseMain case with ventilation holes.On the bottom of the box there are holes for countersunk screws to attach a 2.5&#34; drive.I used - SATA to USB 3.0 reduction Raspberry Pi 5 can be switched to USB boot mode. No need to use an SD card.<img src="http