Thingiverse
Raspberry Pi Alienware Case
von cudbur
109
Downloads
89
Likes
0
Makes
UPDATE:
12/9/2019 Rev 2 - Lowered RPi and added cutout in shell for USB power cables
Raspberry Pi enclosure inspired by Alienware Predator PC case from 2003. Tested with RPI 3 and 4. I'm using a 90degree USB adapter for power
To print shell without supports use the FDM optimized file and allow single perimeter walls settings for the base.
Used one M2.5 brass inserts + M2.5 flat head screw to fasten shell to case
https://www.mcmaster.com/94180a321
Thread-forming screws for plastic used to fasten RPi to tray:
https://www.mcmaster.com/96817a212
Grill is printed with a lot of supports (i.e. 2.5 hour print, mostly support)
12/9/2019 Rev 2 - Lowered RPi and added cutout in shell for USB power cables
Raspberry Pi enclosure inspired by Alienware Predator PC case from 2003. Tested with RPI 3 and 4. I'm using a 90degree USB adapter for power
To print shell without supports use the FDM optimized file and allow single perimeter walls settings for the base.
Used one M2.5 brass inserts + M2.5 flat head screw to fasten shell to case
https://www.mcmaster.com/94180a321
Thread-forming screws for plastic used to fasten RPi to tray:
https://www.mcmaster.com/96817a212
Grill is printed with a lot of supports (i.e. 2.5 hour print, mostly support)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
