Raspberry Pi Case Top Plate for Stackable Case

SummaryTop Plate for this case from Amazon, but the Fan Mount is re-centered over the CPU for the Raspberry Pi 3. The difference isn't that big however, and should provide adequate cooling for the Pi 4.I've included the FreeCAD file if you'd like to edit it.Print SettingsRafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 20% Filament: Comgrow 1.75mm PLAGrey Notes: Center-distance between mounting-holes in the corners are a bit tight. Perhaps a Horizontal-Offset in Cura would fix it, although I haven't tried it yetHow I Designed ThisI originally had the case from Amazon, however it got stepped on, breaking just thin plastic bridging over the GPIO pins. From the plexiglass case, I measured the dimensions with 0.01mm Digital Calipers. Raspberry Pi 3B OctoPi using the top plate