Thingiverse
Raspberry Pi Cluster Rack
von RFX01
319
Downloads
194
Likes
0
Makes
This is a case designed for housing 8 Raspberry Pis along with a 140mm PC Fan.
The body consists of 2 Parts, the Frame and the Fan Cover. A Caddy needs to be printed for every Raspberry Pi that will be housed in this case. Expect a total Print Time of around 3-4 days at 80mm/s. Despite being fairly large parts, they will still fit on smaller Printers such as an Ender 3.
This case is designed to have every Pi individually removable without having to disassemble the entire case. This is realized using caddys with a compliant mechanism to lock them in place. This allows for removing Pis without the use of additional tools. Additionally, there is enough space to outfit every Pi with an "Armor Case", which is essentially just a big aluminum Heatsink for both sides of the Pi. This will significantly increase the surface area for heat dissipation, making the cooling fan much more effective.
#### Required Hardware
1-8x Raspberry Pi 3/4
1-8x Angled USB-C/Micro-USB Power Cable
4-32x
The body consists of 2 Parts, the Frame and the Fan Cover. A Caddy needs to be printed for every Raspberry Pi that will be housed in this case. Expect a total Print Time of around 3-4 days at 80mm/s. Despite being fairly large parts, they will still fit on smaller Printers such as an Ender 3.
This case is designed to have every Pi individually removable without having to disassemble the entire case. This is realized using caddys with a compliant mechanism to lock them in place. This allows for removing Pis without the use of additional tools. Additionally, there is enough space to outfit every Pi with an "Armor Case", which is essentially just a big aluminum Heatsink for both sides of the Pi. This will significantly increase the surface area for heat dissipation, making the cooling fan much more effective.
#### Required Hardware
1-8x Raspberry Pi 3/4
1-8x Angled USB-C/Micro-USB Power Cable
4-32x
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
