Thingiverse

Raspberry Pi Display Case

por ftobler

2.8k Descargas

2.2k Likes

36 Makes

Ver Modelo

A simple display case for the Raspberry Pi 2 & 3 Model B. I used a 3.5inch touchscreen LCD, which is purchased from ebay. Link and guide is listed below.

The micro SD card is accessible from outside. A special feature is, that it is held in place, even when the spring loaded mechanism of the sd slot fails (which happened here).

The raspi is entirely passive cooled. I have not used a heat sink or a fan.

Do not print assembly.stl. I have three different top parts. I only used and printed that width the display. I used some weak glue to bind the parts together.

#####In case you need some changes to the model to fit your Display, there is a [customizer][1]
If this is not enough for you, feel free to send me a message :)

User-specified models:
raspiBplusCase_top_differentCutout.stl
raspiBplusCase_top_extraTall.stl

[display is from ebay][2]

[guide to bring it to life][3]

(I used the raspbian image)

[1]: https://www.thingiverse.com/thing:2395

case computer display enclosure raspberry Raspberry Pi raspberry pi case raspi Touch Touchscreen case computer display enclosure raspberry Raspberry Pi raspberry pi case raspi Touch Touchscreen case computer display enclosure raspberry Raspberry Pi raspberry pi case raspi Touch Touchscreen

Fuente

Thingiverse

Lo que necesitas para imprimir: Intermedio Baja confianza

Pieza única

Soportes 1/3

Ensamblaje 0/3

Ajustes 1/3

Tamaño de cama 0/3

Postproceso 1/3

Impresora

FDM / FFF

Formato de archivo