Thingiverse
Raspberry Pi Jukebox
door JPRanger18
34
Downloads
36
Likes
0
Makes
This is my design for a touchscreen 50's style wall box or tabletop jukebox utilizing a Raspberry Pi (either 2, 3, or 3B+ - I recommend the 3B+,) a couple of small speakers, a 5V amplifier with volume knob and the Fruitbox software which I will link to further down.
Special thanks to dopesoner930. I utilized his EmuPi Mini Arcade monitor screen bezel for the basic front design as it was simple and provided a good foundation to work around:
https://www.thingiverse.com/thing:2966257
It can be run on a standard cell phone style battery pack for portability. I also left a headphone splitter attached and use it to connect to my patio speakers in my backyard patio arcade.
I attached the back with some washers hot glued to the body and used some small magnets glued to the back for easy removal.
This is a heavy work in progress. I have built it and it works, however, some of the holes and mounting choices I completed with a drill and left out of the design to be modified by the
Special thanks to dopesoner930. I utilized his EmuPi Mini Arcade monitor screen bezel for the basic front design as it was simple and provided a good foundation to work around:
https://www.thingiverse.com/thing:2966257
It can be run on a standard cell phone style battery pack for portability. I also left a headphone splitter attached and use it to connect to my patio speakers in my backyard patio arcade.
I attached the back with some washers hot glued to the body and used some small magnets glued to the back for easy removal.
This is a heavy work in progress. I have built it and it works, however, some of the holes and mounting choices I completed with a drill and left out of the design to be modified by the
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
