Raspberry Pi Teleprompter

I needed a teleprompter, but all the designs I found required a larger printbed than what I have on my Prusa MINI. So this design is divided into several smaller parts, because of that.

Everything is screwed together with M3 screws.

The lid for the Raspberry Pi housing has a pressfit-slot for a UNC 1/4-20 nut, suitable for most camera tripods.

The mobile phone bracket is tailor made for my Samsung S7 and it has two cavities for 3x10mm neodymium magnets, so mind that when you slice the file if you want to drop in magnets.

The "beam-splitter" is a 13x18 cm (5x7") acrylic sheet from a picture frame (IKEA HOVSTA). The acrylic sheet is only 1 mm thick so the double-reflections (ghosting) will be minimal.

I have also made a foot-controller for this and it will improve the usability a lot:
https://www.thingiverse.com/thing:4762315

The display and housing is made for a Raspberry Pi 3 A+ with a 7" touch screen.

Check out this great project by ModernHobbyist for info on how