Raspberry Pi Zero 2 USB case

Case for RPi Z2 W with Waveshare USB adapter.
Low tolerance model, so stick to 0.12mm wall height.
Should also fit RPi Z1, but radiator cutout might not be centered over cpu.

USB case is only compatible with Waveshare 15641 USB adapter board. Since I didn't want to be bulk case, USB holding pins have to be cut or sanded down and soldered from top and very flat solder blobs have to be placed (or grinded) on connections - like on my pics. I've made some dents in bottom case in those areas, so if you don't want to go through haste to flatten the boardl, you could easily cut holes for protruding solder. Also dont use adapter screws, there are pins in bottom case, to hold board in place.