Raspberry Pi Zero 2w camera and headers case

This is a case for a Raspberry Pi Zero or Zero 2w that can hold a v1, v2 or v3 Raspberry Pi camera but still allows access to the headers and all the ports. I designed my own because I like to experiment with the camera as well as the I/O capabilities of the Raspberry Pi Zeo 2w, but I couldn't find something like this anywhere. The cable length I used was 1.5" (38mm). Please like and give a 5-star review! Assembly:To put together, just attach the cable to the Raspberry Pi and camera, snap in the Raspberry Pi and camera, put one end of the top part on the bottom part and carefully clip in the other end. Print Settings:Needs no support, print in orientation provided. Printer: Flashforge Adventurer 5mNozzle: 0.4mmMaterial: PETGPrint Speed: Up to 150mm/s for solid infill, but 70mm/s for outer wall. Also, I set small perimeter threshold to 2mm and small perimeters speed to 10mm/s so the clips would print slowerLayer Height: 0.2mm, but I used variable layer height for the clips, down