Raspberry Pi Zero Camera Case

Goals
====
* Small as possible
* Hold the Raspberry Pi and Camera Module v1.3 or v2.0 securely
* Does not require fasteners
* Simple assembly and ability to get things out of the box
* Access to power, usb and uSD card

The case was designed in Fusion 360. Download and make changes to the design if you like [Fusion 360 Design](https://a360.co/2KVs1cC).

Printing and Assembly
==============
Print the board without support. It's designed to print on the flat sides of the case and the lid.

This is simple Raspberry Pi Zero camera case. The case doesn't require fastener or any additional tools to assemble. You just need to print it and its snaps closed with the Raspberry Pi and Camera Module inside hold securely in place.

Place the camera module first tucking it under the top of the box lip. Then fold the flex cable at the bottom of the box. There is enough space to do this safely.

Insert the raspberry pi board under the side of the box opposite to all connector and