Raspberry Pi Zero Camera Case with Ethernet

This not my own original work. Any rights to this design belong Pi Sugar. Released under GNU/GPL. You must enlarge the STL in the slicer software by 0.5 mm. This is a great screw less case design. Go to https://www.pisugar.com/ to view their awesome designs. Go to https://github.com/PiSugar/PiSugar for the case designs. Printed on a CR-10 and an Anet A8. 200deg head and 60 deg bed. PLA., Edited in Solidworks 3d Experience x-Design.

Ethernet for Pi Zero:
https://www.amazon.com/waveshare-Ethernet-Raspberry-Ports-Compatible/dp/B09BJ114RC/ref=sr_1_25?keywords=raspberry+pi+zero+ethernet&qid=1636992481&sr=8-25

Pi Zero OS can be found here:
https://www.raspberrypi.com/software/operating-systems/ -Use the lite version with no desktop.

Picamera installation instructions can be found here: https://opensourcelibs.com/lib/pistreaming

Use - sudo apt-get - install ffmpeg git python3-picamera

Problem with installing python3-ws4py refer here: https://github.com/waveform80/pistreaming/