Thingiverse
Raspberry Pi Zero Camera Holder
von robohead456
123
Downloads
69
Likes
0
Makes
A simple mount to hold a Pi Camera to a Raspberry Pi Zero.
The camera is attached using M2 bolts, preferably nylon as metal bolts could short the Pi.
The Pi is attached using M2.5 bolts. In my photos I used M3 bolts because I didn't have any M2.5 bolts available. If you want to use M3 bolts you will need to use a drill bit to make the mounting holes in the Pi and the printed parts larger.
The camera is attached using M2 bolts, preferably nylon as metal bolts could short the Pi.
The Pi is attached using M2.5 bolts. In my photos I used M3 bolts because I didn't have any M2.5 bolts available. If you want to use M3 bolts you will need to use a drill bit to make the mounting holes in the Pi and the printed parts larger.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
