Raspberry Pi Zero Pi-KVM Case

This is the RPi Zero variant of my RPi4 Pi-KVM Case. I find the Zero version of Pi-KVM convenient sometimes. Same as the other case I included different tops and also included a bottom that has zero text on it. This only supports the smaller version of the HDMI to CSI-2 board. There is no access to the HDMI port on the RPi Zero as I find it pretty useless for this application so why have an open port for it. I have also included easy access to the SD Card without having to use pliers or something else to remove it.

The screws needed are the following.
4 x M2.5 4mm for Raspberry Pi Zero
4 x M2.5 4mm for HDMI to CSI-2
4 x M2 4mm for OLED

I used the following parts in my photos.
Raspberry Pi Zero WH
Waveshare HDMI to CSI-2
Frienda 0.96" 128x64 OLED

I printed everything at 0.2mm layer height. The bottom at 20% infill and top at 60% infill. The logo insert must be printed with a -0.15mm horizontal expansion so it will fit into the top. It is a tight fit so you may need to use