Thingiverse
Raspberry Pi Zero W camera mount
by thirdhorizon
18
Downloads
15
Likes
0
Makes
A simple pan/tilt mount to use a Raspberry Pi Zero W with camera to monitor your 3D printer. Designed to fit a Raspberry Pi Zero W case from [Vilros](https://www.amazon.com/gp/product/B0748MPQT4/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1).
Print one of each part. Fix together with two M5 screws and nyloc nuts. Attach to any T-Slot or V-Slot extrusion with two M5 screws and T-nuts. Insert Pi Zero after installation.
In the installation shown, this is used on the top frame of a [BareXY](https://www.bare3d.us/) printer, and is powered directly from the PanelDue 5V connector on the [Duet 2 Wifi](https://www.duet3d.com/DuetWifi) board.
Print one of each part. Fix together with two M5 screws and nyloc nuts. Attach to any T-Slot or V-Slot extrusion with two M5 screws and T-nuts. Insert Pi Zero after installation.
In the installation shown, this is used on the top frame of a [BareXY](https://www.bare3d.us/) printer, and is powered directly from the PanelDue 5V connector on the [Duet 2 Wifi](https://www.duet3d.com/DuetWifi) board.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
