RED & BLACK

Project: B&R.hfpPrint at 100% infill with a layer height of 0.16mm with a base layer of 0.2mmThe Model is 105x186.6mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.3mm and the Actual Depth is 2.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 1.5 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #5 (0.84mm) swap to Red At layer #9 (1.48mm) swap to Silver At layer #10 (1.64mm) swap to Jade White for the rest.