Redemption Arc

This is my second design using Hueforge! It speaks to the delicate nature of feminine beauty.You might notice that I added a 200x200 frame in one of the pictures. Found here on Makerworld, of which there are a several to choose from. The one I used needed a few drops of glue, but if you would like to use that one, you can find it here: https://makerworld.com/en/models/106720#profileId-118126Please leave a comment if you print it! Any constructive feedback would be much appreciated.I'm still learning, but wanted to give something back to the community of epic creators I've discovered here. Cheers!-//Technical jazz:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 200x200mm in size.You may print at higher layer heights below the Min Depth of 0.48mm.The Max Depth is 2.2mm and the Actual Depth is 2.3mm. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Tra