RepRap Clover

RepRap Clover is a tiny, low-budget Delta 3D printer. The design was made very simple so anyone can use almost any spare parts they have laying around. It is also very easy to scale and expand on. I encourage you to modify and add onto the files for your own purposes and available materials.

*Default specs:*
Build area: 100mm diameter, ~90mm height
Min Layer height: 0.05
Top printing speed: ~100mm/s
Materials: PLA, Wood filaments

*Materials Needed:*
-4x NEMA17 motors
-1x Hotend, recommended E3D Lite6
-1x Controller, recommended Printrboard
-1x PTFE tube, 4mm OD, 2mm ID
-2x M4 nuts
-1x Printrbot Alu extruder, or printed version found on thingiverse
-6x equal-length rods, or 3 equal length T slots
-6x m3x8 screws
-3x belt and pulley of your choice (default is GT2, 20 tooth pulley)
-6x 15mm steel balls
-18x 6mm diameter, 4mm tall magnets
-2x M3x16 screws
-12x 1/2" 6-32 screws
-12x 6-32 nuts
-3x M8x25 screws
-3x 608 (8x22x7) bearings
-x3 mechanical endstops

[M