Thingiverse
RepRap Smart Display Controller Stand
von Hangtight
100
Downloads
77
Likes
1
Makes
APOLOGIES....
Turns out the source model for the 12864 display was garbage. A redesign with a more accurate source model is incoming.
V2 IS NOW UPLOADED. Please be aware that I'm working from imported models of the screen. To the best of my ability I verify them, but unfortunately not everything on the internet is correct!
A first draft stand for the ReprRap smart display/controller. Requires 4x M3 x 8mm, and 4x M3 x 16mm socket heat bolts.
The parts are already oriented for printing. Only the main body will require supports in the window, unless your printer is really good with bridging!
22-3-19: Cutaway to clear the board solder connections below the screen added to the Main Body.
Turns out the source model for the 12864 display was garbage. A redesign with a more accurate source model is incoming.
V2 IS NOW UPLOADED. Please be aware that I'm working from imported models of the screen. To the best of my ability I verify them, but unfortunately not everything on the internet is correct!
A first draft stand for the ReprRap smart display/controller. Requires 4x M3 x 8mm, and 4x M3 x 16mm socket heat bolts.
The parts are already oriented for printing. Only the main body will require supports in the window, unless your printer is really good with bridging!
22-3-19: Cutaway to clear the board solder connections below the screen added to the Main Body.
Hangtight veröffentlicht auch auf
8 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
