Thingiverse
RepRap Smart Display Controller Stand
par Hangtight
100
Téléchargements
77
Likes
1
Makes
APOLOGIES....
Turns out the source model for the 12864 display was garbage. A redesign with a more accurate source model is incoming.
V2 IS NOW UPLOADED. Please be aware that I'm working from imported models of the screen. To the best of my ability I verify them, but unfortunately not everything on the internet is correct!
A first draft stand for the ReprRap smart display/controller. Requires 4x M3 x 8mm, and 4x M3 x 16mm socket heat bolts.
The parts are already oriented for printing. Only the main body will require supports in the window, unless your printer is really good with bridging!
22-3-19: Cutaway to clear the board solder connections below the screen added to the Main Body.
Turns out the source model for the 12864 display was garbage. A redesign with a more accurate source model is incoming.
V2 IS NOW UPLOADED. Please be aware that I'm working from imported models of the screen. To the best of my ability I verify them, but unfortunately not everything on the internet is correct!
A first draft stand for the ReprRap smart display/controller. Requires 4x M3 x 8mm, and 4x M3 x 16mm socket heat bolts.
The parts are already oriented for printing. Only the main body will require supports in the window, unless your printer is really good with bridging!
22-3-19: Cutaway to clear the board solder connections below the screen added to the Main Body.
Hangtight publie également sur
8 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
