Thingiverse
RMRC CCD camera mount
door MiguelAlvarez
67
Downloads
50
Likes
0
Makes
I'm not sure if all ReadymadeRC ccd cameras are the same dimensions. This holder was made using the dimensions of
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_62_12&products_id=582
Its a tight fit and can be plcaed on the original hinge using earplugs or another dampener (I chose moongel).
You'll need a 16mm M3 screw and an M3 nut.
I also used a rubber band to hold the camera case against the hinge.
Also I had to cut out a section of the original hinge to leave space for the camera cable to connect
http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_62_12&products_id=582
Its a tight fit and can be plcaed on the original hinge using earplugs or another dampener (I chose moongel).
You'll need a 16mm M3 screw and an M3 nut.
I also used a rubber band to hold the camera case against the hinge.
Also I had to cut out a section of the original hinge to leave space for the camera cable to connect
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
