Thingiverse

Rocket camera pod

di Jarl-MacSalt

33 Download

23 Likes

0 Makes

This is a simple and inexpensive way of obtaining good quality video/sound from a model rocket in flight. The body tube is a standard approximately 24mm I.D. / 15/16". As with all model rockets, careful construction, balance, supervision, and experience is required for this project to be optimal. If you are not experienced determining model rocket aerodynamics and balance, do not use this modification.

Note- You must locate and drill two 4.00mm holes for accessing the switch buttons and a 1.00mm hole for observing the indicator light.

Thanks, Enjoy!

3Dmodel camera camera mount Estes model model rocket rocket rocket camera sq11 sq11 camera mount 3Dmodel camera camera mount Estes model model rocket rocket rocket camera sq11 sq11 camera mount

Fonte

Thingiverse

Cosa serve per stampare: Principiante Bassa affidabilità

Pezzo unico

Supporti 1/3

Assemblaggio 0/3

Impostazioni 1/3

Dimensioni piano 0/3

Post-lavorazione 0/3

Stampante

FDM / FFF

Formato file