Thingiverse
Rogue keypad
di biocode
8
Download
5
Likes
1
Makes
Based on my [Eyetooth](https://www.thingiverse.com/thing:3865271) keypad, I got a request for a keypad with a Ideazon Merc style layout.
This build used Cherry MX red keys. The top uses cheap 3mm inserts. The halves are held together with 3 x 12 mm screws. The countersunk holes are supported by a thin layer that must be drilled out or simply punched through.
Accompanying firmware and build instructions are available on [github](https://github.com/biocode3D/eyetooth)
The CAD files are available on [Onshape](https://cad.onshape.com/documents/f7d1b2c6e847d5ad10fb3bf3/w/17d0ebd872c4248000dc6aab/e/3480ac974f6575674f5b8d29)
The keycaps shown were sla printed using the excellent [KeyV2](https://www.thingiverse.com/thing:2783650) by rsheldiii .
This build used Cherry MX red keys. The top uses cheap 3mm inserts. The halves are held together with 3 x 12 mm screws. The countersunk holes are supported by a thin layer that must be drilled out or simply punched through.
Accompanying firmware and build instructions are available on [github](https://github.com/biocode3D/eyetooth)
The CAD files are available on [Onshape](https://cad.onshape.com/documents/f7d1b2c6e847d5ad10fb3bf3/w/17d0ebd872c4248000dc6aab/e/3480ac974f6575674f5b8d29)
The keycaps shown were sla printed using the excellent [KeyV2](https://www.thingiverse.com/thing:2783650) by rsheldiii .
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
