Rose HueForge

Remember if you sant to scale, do it only with x and y axis, z must be the same as original. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Pink At layer #10 (0.88mm) swap to Red At layer #17 (1.44mm) swap to Jade White for the rest.