Rotating Driver Stand

Rotating Driver StandEasy to grab, easy to put back.(suitable for all Drivers with a 12mm shaft). ------------------------------ Socket Screw Version: What you need:1x 608 Ball-bearing2x (8x16mm) Hex Screws - nothing more - nothing less ;) Preparation:Insert the 608 Ball-bearing into the “Rotating plate”.To do so, place the bearing on a flat and hard surface and locate the “Rotating plate” on to the bearing and give it a good push until its level.⚠ Don&#39;t do this on a wooden or delicate desk! The bearing could leave a dent or imprint. Assembly:Push the “Pole” into the “Base” and screw the Socket Screw into place until sitting flush.Press the Socket Screw Head into the “Cap”.Drop the 0.2mm Spacer on the “Caps” Screw.Locate the “Rotating plate” on the “Caps” ScrewNow Screw both assemblies together and adjust the play of the “Rotating plate” by tightening or loosening the Cap.<p style="text-align: c