Rotating Plate

This project is a rotating plate to show of prints or other objects that fit on it. I designed it to be able to control the 360 degree movement of another project I am working on but I modified it to be a rotating plate so that I can put other stuff on top of it. To put it together print the main base plate at the stepper motor cover. Then take the screws out of the back of this servo motor, or whichever other one you are using, and screw them into the stepper motor through the panel.Then put the main center gear onto the stepper motor with the flat side of the motor pin facing the flat side of the gears screw port and the using an m3 screw through the hole on the port screw it in to lock the gear in place on the stepper motor. Then once that is done you can put the other four identical gears onto their poles in place so they line up with the center gear. And then you place the plate onto of it. The outer gear in this image is just the top spinning plate without the top so you can see