Thingiverse
Rotating spice rack
von raquel95ap
340
Downloads
341
Likes
1
Makes
This is a rotating spice rack.
Holes diameter: 46 mm.
There are two versions: one for 16 spice jars (aprox. 250 mm height), and other one for 12 spice jars (aprox. 200 mm height).
You can print only de main parts (body and top cover), so that it is not rotatory, or print also the bearing couplings. You only need to buy the bearing (I bought that one: https://www.amazon.es/dp/B076ZPGWKL/?coliid=I2BE1QXNQFHRIC&colid=I9XOLAACHUVJ&psc=1&ref_=lv_ov_lig_dp_it // bearing reference: 6206 2RS // ext diam. 62 mm, in. diam. 30 mm, width 16 mm).
You can also design your own bearing couplings for better fit or if you have used another bearing of different size.
To assemble the parts, glue the couplings to the bearing, and the upper coupling to the base of the spice rack body. You can also glue the top cover with the body.
Ikea spice jars also fit in it.
(ES):
Especiero giratorio.
Diámetro de los agujeros: 46 mm.
Hay dos versiones: uno para 16 botes de especias (altura
Holes diameter: 46 mm.
There are two versions: one for 16 spice jars (aprox. 250 mm height), and other one for 12 spice jars (aprox. 200 mm height).
You can print only de main parts (body and top cover), so that it is not rotatory, or print also the bearing couplings. You only need to buy the bearing (I bought that one: https://www.amazon.es/dp/B076ZPGWKL/?coliid=I2BE1QXNQFHRIC&colid=I9XOLAACHUVJ&psc=1&ref_=lv_ov_lig_dp_it // bearing reference: 6206 2RS // ext diam. 62 mm, in. diam. 30 mm, width 16 mm).
You can also design your own bearing couplings for better fit or if you have used another bearing of different size.
To assemble the parts, glue the couplings to the bearing, and the upper coupling to the base of the spice rack body. You can also glue the top cover with the body.
Ikea spice jars also fit in it.
(ES):
Especiero giratorio.
Diámetro de los agujeros: 46 mm.
Hay dos versiones: uno para 16 botes de especias (altura
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!