Rotating Swatch Storage (200 Slots)

You can use this rotating swatch storage with any filament swatches in the format of 24x24x2mm like the ones from Bambulab.Of course I also created a fitting swatchNeeded hardware2* 51110 axial bearing (ID= 50mm, OD=70mm, H=14mm)6* M4 heatset inserts (Ruthex style)6* M4x25mm socket head screws (DIN 912 / ISO 4762)6* 20mm diameter, 5mm high rubber feet (I used clear ones as they don&#39;t stain your table top)PrintingSimply print all files with the orientation in the 3MF file.Only the base and the bearing clamp need supports.PreparationRemove supportsClean outside of bearings from oil/greaseGrind running slope of “Base” lightly to get a smooth surface for the swatches to run on Install heatset inserts into &#34;Top&#34;AssemblyTake care of the bearing orientation! As you can see in the picture, the outer rings have a different internal diameter!Lay “Top” on the table (bottom side up)Mount first bearingMount “Base” onto “Top”<img src="https://