Round Birdhouse

No city is complete without wildlife, and that wildlife needs a safe place to call home. Therefore, I have created this simple, but elegant Round Birdhouse! All parts of the Birdhouse are 3D printed and the only hardware needed is a #10 screw for mounting. The Perch Rod and Nut are designed to be a tight fit, so if needed you can use a 13/16 socket to assist with tightening. Do not over tighten or you risk breaking the threads on the rod. Due to this design being made for outdoor use, it is recommended to use at least PETG to help with any heat or weather encountered. Assembly instructions: Place Perch Rod through hole on Front piece of birdhouse Tighten the Nut on the exposed threads of the Perch Rod Do not over tighten. The Nut will secure nicely against the back of the Front piece and once that is achieved you can stop tightening. Angle the Front piece and slide / rotate it into the Housing Snap the Front piece into the Housing using the locating dots There are 3 balls on the Front piece that line up with 3 indents on the Housing 1 is at the very bottom. It is easiest to keep the front Piece angled and guide that connection into place first, then pull up on the Front piece to click the others into place. If you'd like access to a Commercial License and exclusive designs not available anywhere else: Join me on Patreon!