Rune Doom - Hueforge

Project: doom rune.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.5mm and the Actual Depth is 1.5mm Filaments Used: PLA Red Transmission Distance: 4 PLA Black Transmission Distance: 0.6 This print uses 2 unique filaments Swap Instructions: Start with Red At layer #10 (0.88mm) swap to Black for the rest.