Rusty (Battlebots)

It's Rusty! From Battlebots! Yes! I made this by looking at a ton of different photos of Rusty from as many angles as possible, and this helped me get most of the proportions and details right, I think. Ideally I'd spend an afternoon with Rusty and a tape measure to get it *perfect*.

I don't have time to really sort or organize this properly, so here's everything; the part files, the step files, and the stl files. This is more of a project than a ready-to-print model.

- The holes for the switch, nails, and LEDs might not match what you have on hand, so you may need to modify them.
- You will also probably need to do a bit of sanding on a lot of the parts to get them to fit right.
- For paint, I used Testors metallic silver and flat rust.
- The treads will need to be printed from a flexible filament like TPU.
- The hole on the back of Rusty is for a countersunk M3 screw, this was to make the back panel removable to unlock the top cover to get inside, but removing the bowl i