Safe Mag

This is what i call the “Safe Mag”. It is designed to be a lock and range flag for your rifle using the magazine well. I personally hate the cable locks; this replaces those and only allows the bolt to move about ½" if it releases during transport. Safe Mag uses the 7/8 arcade style locks as you see in one of the pictures, remove the locknut and other hardware it comes with but keep the cam nut, you'll need to flip it over so that when you engage the lock the key can be removed, not the other way around as will be the case in this assembly. In my pictures you'll see a small hole in the main shaft, that is for a small 2mm approx., pin to help secure the shaft to the lock shaft, you'll need to drill that out if you chose to do that. I did not and it has not been a problem, but I did use a good amount of ca glue between the main shaft and the lock shaft. the pinion gear is press fit onto the main shaft. the rack gear rides in a track in the body side. make sure you have th