samurai + dragon

Project: dragon y samurai.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 113.71x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.9mm and the Actual Depth is 3mmFilaments Used: PLA smartfil negro Transmission Distance: 0.4 PLA smartfil dark grey Transmission Distance: 0.8 PLA smartfil gris Transmission Distance: 0.8 PLA smartfil carne Transmission Distance: 1.6 PLA smartfil amarillo Transmission Distance: 2.5 PLA smartfil naranja Transmission Distance: 1.2 PLA smartfil White Transmission Distance: 6This print uses 7 unique filamentsSwap Instructions: Start with negro At layer #10 (0.88mm) swap to dark grey At layer #13 (1.12mm) swap to gris At layer #22 (1.84mm) swap to carne At layer #23 (1.92mm) swap to amarillo At layer #25 (2.08mm) swap to naranja At layer #28 (2.32mm) swap to White for the rest.Proyecto: dragon y samurai.hfpImprima con un relleno del 100 % con una altura de capa de 0,08