Samurai

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 142.92x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Tough Vermilion Red Transmission Distance: 3 PLA BambuLab Tough Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Vermilion Red At layer #12 (1.04mm) swap to Black At layer #23 (1.92mm) swap to Jade White for the rest.