sasuke hueforge

Progetto sasukePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 1.3mmFilaments Used: PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Lilac Purple At layer #5 (0.48mm) swap to Black At layer #8 (0.72mm) swap to Ice Blue At layer #11 (0.96mm) swap to Ivory White for the rest.