Printables

Accessories

screwdriver holder

by Slava Anufrijev · Accessories

90 Downloads

6 Likes

0 Makes

Go to Model

Print time - 8h, PLA, no supports, quality - 0.2mm, infill - 20%.

Category

Accessories

Source

Printables

Published

29.01.2023

Updated

29.01.2023

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

8 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does screwdriver holder need supports when printing?

No supports needed for screwdriver holder — it's designed to print clean off the bed.

How long does it take to print screwdriver holder?

According to the design notes, screwdriver holder takes approximately 8 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is screwdriver holder available in?

screwdriver holder is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Printables.

Is screwdriver holder free to download?

Yes, screwdriver holder is available as a free download through Printables. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

screwdriver holder

Similar Models

Add to Collection