Thingiverse
Screwhedral Construction Set
von dgs5047
2
Downloads
2
Likes
0
Makes
I designed this toy kit for my 4.5 year old daughter because she "loves to help Daddy build things." She was particularly interested in installing the screws during my recent Milo Mill build so I created the "Screwhedral".
The printed parts consist of 10 cuboctahedron shaped "hubs", four of each length "link", one box bottom, one box top, and 4 screw retainers. For hardware you will need 144 M5x0.8x 9.5mm heat set inserts, 40-50 M5x0.8 15mm BHCSs, a small amount of 3/4" wide two sided hook and loop strap, and a 3mm hex screwdriver.
Links to some of the components I used:
Heatset Inserts: https://cnckitchen.store/products/heat-set-insert-m5-x-9-5-50-pieces
M5 Screws: https://www.mcmaster.com/92095A127/
Wera 3mm Hex Driver: https://a.co/d/5HGPoxF
Hook and Loop Strap: https://a.co/d/9waZQCx
Filaments I used: (you don't have to use ABS)
Atomic Neon Yellow UV Reactive ABS: https://atomicfilament.com/products/neon-yellow-uv-reactive-abs-filament
Atomic Black ABS: https://atomicfilamen
The printed parts consist of 10 cuboctahedron shaped "hubs", four of each length "link", one box bottom, one box top, and 4 screw retainers. For hardware you will need 144 M5x0.8x 9.5mm heat set inserts, 40-50 M5x0.8 15mm BHCSs, a small amount of 3/4" wide two sided hook and loop strap, and a 3mm hex screwdriver.
Links to some of the components I used:
Heatset Inserts: https://cnckitchen.store/products/heat-set-insert-m5-x-9-5-50-pieces
M5 Screws: https://www.mcmaster.com/92095A127/
Wera 3mm Hex Driver: https://a.co/d/5HGPoxF
Hook and Loop Strap: https://a.co/d/9waZQCx
Filaments I used: (you don't have to use ABS)
Atomic Neon Yellow UV Reactive ABS: https://atomicfilament.com/products/neon-yellow-uv-reactive-abs-filament
Atomic Black ABS: https://atomicfilamen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
