SD Card Case - SD & Micro SD

A slim and practical SD card case designed to keep your memory cards organized and protected — each slot fits both standard and micro SD cards. The normal version has 4 slots on each side - you can put the inserts into the bottom and lid at the same time, so the case fits up to 12 SD and Micro SD cards. You can even use one slot for SD and Micro SD at the same time if you like. The case features a snap latch. For assembly you will need 4 M3x16 or longer screws. You can also use the M3x30 as used by many other cases. The top and bottom feature line patterns and an SD card icon — you can also print it without them, with only the lines, or with just the icon. There is also a smaller version which has 4 slots on each side, otherwise the features are the same. MaterialThis design works well with PLA. For long time usage, I recommend printing the inserts from PETG, since the PLA clamps could lose their stiffness over time. PrintingNo special settings are required for printing, except a small