Thingiverse

SendiT Camera Mount (Micro Eagle)

von SpartanFPV

2 Downloads

2 Likes

0 Makes

This is a remixed FPV camera mount for the Floss 2 from Brain3D. I modded to fit a Runcam Eagle Micro with the M8 lens. This will fit all frames that are about 22mm tall with standoffs 30.5mm center to center. I added a little material under the original camera mounts and there is no need for support material. Since the Micro Eagle is a larger camera and the lens has a 16mm diameter so I made a larger cutout and also added material near the lens to help bolster the support near the lens.

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat