Slicer Discord
Servo Test Cube – 3D-Druckmodell von Thingiverse Thingiverse

Servo Test Cube

von RC_HC
9 Downloads
5 Likes
0 Makes
Zum Modell
This is a servo tester cube that can measure its current. Also includes a battery compartment. Also important is the power consumption of the servos. If you want to dimension PolySwitch fuses, too.

For more information about fuses, visit:
http://rc.emiter.hu/rc-miskolc/index.php/f1-on-board-fuse
and
http://rc.emiter.hu/rc-miskolc/index.php/pb3-battery-combinerfuses-power-board

Used materials:

Instrument (3A):
https://www.aliexpress.com/item/1PCS-85C1-A-1A-2A-3A-5A-10A-15A-20A-30A-50A-75A-DC-Analog-Meter/32897836362.html?spm=a2g0s.9042311.0.0.27424c4dez5pjj

Servo tester:
https://www.aliexpress.com/item/Multi-Servo-Tester-3CH-ECS-Consistency-Speed-Controler-Power-Channel-CCPM-Meter-Master-Checker-RC-Dron/32957541836.html?spm=a2g0s.9042311.0.0.27424c4dez5pjj

screws:
2.4x10mm phillips and 2pcs 2.4x6mm phillips

Servo extension cabel: 10-20cm

The servo must be removed from its packaging and screwed into place. Cut and seal the package with instant glue (this will
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, Polycarbonate
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen