Shapeoko 2 Electronics Enclosure

This enclosure has space for the fan, Arduino UNO and GShield plus a small board to screw in the wires for LImit Switches. Be careful to note the hole positions on your limit switch board or it will be crooked like mine :=} I decided not to change it since it's still functional. The corner anchors were 3D printed, however you may want to use Ø3mm brass standoffs instead because they have threads and would be better if you needed to open it often. The only thing I don't like is you can't get at the reset buttons on the cards. Perhaps someone will improve on my design. :=}
It's mounted to the Shapeoko Plate via the acrylic 1/4" bracket that I threaded for Ø5mm screws. All sides and bracket were assembled using Weld-On. Make sure you dry fit first before applying Weld-On.
http://www.amazon.com/Weld-On-Acrylic-Adhesive-Applicator-Bottle/dp/B0096TWKCW/ref=sr_1_1?ie=UTF8&qid=1400526862&sr=8-1&keywords=weld+on+4.

****UPDATE****
http://youtu.be/6VvwGszE8Xo

This video